Perceuse Festool C 18 HPC 4,0 I-Set; 18 V; 2x4,0 Ah akum

Universal flexibility when drilling and screwdriving: electronic torque adjustment, CENTROTEC quick-change system for tool-free changes, angle and eccentric attachments, and depth stop suitable for all drilling and screwdriving applications. The combination of the Li-HighPower battery and the brushless EC-TEC motor, which is brushless and therefore maintenance-free, ensures the lightweight, durable, and long-lasting performance of the C 18 cordless drill driver without recharging. 

• Switch between screwdriving and drilling without adjusting the torque setting
• Practical accessories such as angle and eccentric attachments, depth stop, and the CENTROTEC quick-change system allow you to tackle any task
• FastFix attachment ensures quick changing of attachments without the need for additional tools
• Durable, robust, and powerful thanks to the brushless EC-TEC motor without brushes, which requires no maintenance
• Festool SERVICE ensures reliable protection for the cordless tool and battery
• Equally powerful and noticeably lighter due to the Li-HighPower battery with high-current cells
• Electronic torque control ensures precise screwing
• Compelling ergonomics, unique design: compact, lightweight tool with perfectly balanced weight
• High-quality screwdriver bit set BKS SYS3 D5 PZ TX 100 CE is already included: Screwdriver bit PZ 2 100 mm CE, Screwdriver bit TX 15 100 mm CE, Screwdriver bit TX 20 100 mm CE, Screwdriver bit TX 25 100 mm CE, Screwdriver bit TX 30 100 mm CE, Centering bit D 5 CE/W
• The drill driver in the systainer with lid compartment can be perfectly integrated into the "Bott" company's automotive equipment for easy transportation from the workshop to the construction site. The systainer with lid compartment is a suitable accessory – whether it's long screws, small parts, or screwdriver sets – everything is neatly stored and always within reach

Exceptional Features
Change more often.
CENTROTEC quick-change system, angle and eccentric attachments, and depth stop ensure a higher drilling and screwdriving speed. The practical torque memory function ensures the maintenance of the set torque even when switching between drilling and screwdriving modes.

Form – original. Content – intellectual.
A compact and ergonomic tool that fits perfectly in the hand. The lightweight and powerful Li-HighPower Compact battery ensures less weight and comfortable handling. The intelligent EC-TEC motor without brushes uses only as much energy as is needed for the specific task, resulting in greater efficiency at work.

Detailed Product Information

Intelligent motor control system
The brushless EC-TEC motor is wear-resistant and converts almost all battery energy into the working power of the tool. The electronic motor control system ensures maximum durability: microprocessors control and regulate temperature, voltage, and the current used by the motor, electronics, and battery.

Durable and very lightweight
The Li-HighPower Compact battery guarantees full power while weighing very little. In addition to lasting longer on a single battery charge, the brushless and maintenance-free EC-TEC motor always consumes only as much power as needed to screw a particular screw.

Exceptional precision
The comfortable and perfectly balanced "C" construction, the grip position in drilling and screwdriving mode allows for precise tool placement.

When it gets tight
As in all Festool cordless drill drivers, the C 18 screwdriver bits can be placed in a direct holder in the chuck.

6 screwdriver bits always at hand
The practical bit holder has space for up to six screwdriver bits – magnets keep them secure to prevent them from falling.

For tight spaces
The angle attachment makes work in corners and hard-to-reach places easier.

Right at the edge
With the eccentric attachment, every screw is reachable.

CENTROTEC quick-change system
The CENTROTEC quick-change system allows for instant switching between drilling, drilling to a set depth, and screwdriving. It serves as both a chuck and a holder for screwdriver bits, but it is 50% smaller and 80% lighter compared to a standard chuck. The tools with a six-point collet are aligned by means of wheels – for optimal power transmission and ten times greater screwing accuracy.

Chuck for standard tools
The standard chuck with a 13 mm clamping width is designed for use with standard screwdriver bits and drills. With the FastFix chuck, it is secured without the use of tools.

Force reveals itself optimally
Fully electronic torque adjustment and disengagement allow you to select the optimal force for any work situation. The set screwdriving torque is maintained, even if occasionally drilling at maximum torque.

Optimal illumination
Integrated LED lighting allows for precise work in dark corners.

Screwdriver bits and screws always at hand
The screwdriver is delivered in a practical systainer with a lid compartment, with which the necessary accessories – whether long screws, small parts, or screwdriver sets – are neatly stored and always at hand. To make it easy to transport from the workshop to the construction site, the Systainer³ can be perfectly integrated into Bott's company's automotive equipment.

Main Application Areas

• Furniture assembly
• Fastening of fittings, rear walls of furniture, attachment of skirting boards
• Installation of doors and windows, screwing into wood, metal, plastic, and drilling in various materials
• Installation of fences, canopies, and roofs
• Installation of wooden supporting structures